Consult the Sun hardware platform document to determine which Linux releases are supported on your specific host platform. In the Save As dialog box, enter a destination directory for the patch, and click the OK button. Power on the connected storage device, and then power on the host. Starting with the 7. To Download and Install the Linux Driver. Note – Leave the HBA in the protective bag until you are ready to install it. After booting, install any required patches for the mpt driver.
|Date Added:||5 March 2018|
|File Size:||44.24 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you have disconnected the power cable, reconnect it.
See the man page for this command or the Solaris documentation. The probe-scsi-all command displays the SCSI devices that are connected to the host, as shown in the following uba example. Physically remove the power cord s from the system.
LSI SAS i and e HBAs Review | – Storage Reviews
Consult the Sun hardware platform document to determine which Linux releases are supported on your specific host platform. Note – If problems occur, contact your service provider for assistance. To inform any mounted users that the system will be going down, use the shutdown command. Decrease the numeric value to change the boot order. To exit this screen, press the Escape key.
This chapter contains the following sections:. Power on the connected storage device, and then power on the host. Print or save the patch instructions from the browser window. This chapter describes how to install the HBA, yba the installation, and boot from a disk drive connected to the Hbq.
To Download and Update the Windows Firmware. When prompted, type hb number of the disk drive that is attached to the HBA card you just installed and press Enter.
Remove the cover from the chassis of the system. See Safety Agency Compliance Statements.
Supermicro LSI SAS3008 HBA Review
Use the arrow key to highlight Exit the Configuration Utility and press Enter. Verify that no errors have occurred by checking the SunVTS status window. Refer to Software Installation for instructions on downloading and installing mpt pmt patches. Under Support Resources, click Patches and Updates.
Consult the Sun hardware platform documentation to determine which Windows releases are supported. See the man pages or the Oracle Solaris documentation for more information about these commands. After booting, install mph required patches for the mpt driver.
Consult the Sun hardware platform documentation to determine which Linux releases are supported on each specific platform. The required Solaris patches are available for download at:. To Download and Install the Windows Driver. If no problems occur, stop the SunVTS software. Under Firmware, click to download the firmware zip file and the corresponding Readme file. Read and observe the safety information for this product.
This example shows two SAS controllers. mpg
Installing the HBA Software. Click to select and download the specific Windows driver that is supported by the Windows release on your hardware platform.
FreeBSD Manual Pages
The SunVTS software is also available for download at:. For more detailed information, see your system installation or service documentation.
Before you start, read the instructions in this section as well as the installation instructions for the storage devices to be connected to the HBA.
For instructions, refer to the hardware documentation that came with your system.